IMPORTANT! In order to protect the integrity of your company’s data, Procore Employees are restricted from modifying the data that clients submit in all Procore Import Templates. This restriction applies to all data modifications, including correcting typographical errors. If Procore determines that errors are present in any Procore Import Template that you submit to Procore, it will be returned to you for correction. Please note that the import process may take up to 72 hours to process.
To import multi-level cost codes to the Company level Admin tool.
The Company level Admin tool provides your company's Procore Administrator with the ability to create multi-level cost code structures that can be used to manage, report and track budgets associated with your company's Procore construction projects. The cost code structure in Procore supports up to five (5) levels (a.k.a., tiers, levels of detail, codes and so on). This hierarchical structure provides Procore's clients with a significant amount of flexibility for defining company and project cost code structure(s).
Most Procore customers create a two (2) level cost code structure. To learn how to import custom cost codes with two (2) levels, see Import Two-Level Cost Codes to the Company Admin Tool and Import Two-Level Cost Codes to the Project Admin Tool.
In Procore, cost codes structures that contain three (3) level or more are referred to as multi-level. To learn how to import multi-level cost codes, you have these options:
- To import codes to the Company level Admin Tool, use the Steps below.
- To import codes to the Project level Admin Tool, see Import Multi-Level Cost Codes to the Project Admin Tool.
You can also expedite the import process and perform your own cost codes import using the Procore Imports App.
Cost Code Structure
Procore customers create varied cost code structures to use for budget and cost accounting. The specific cost code structure that your company chooses to use in Procore will depend upon your company's specific accounting methods, practices and requirements. For simplicity, most customers choose Procore's a two (2) level or three (3) level cost code structure. However, Procore's supports a structure of up to five (5) levels.
The table below shows some commonly used terminology that corresponds to Procore's supported cost code levels.
|Procore (2 Level Template)||Procore (3-5 Level Templates)||CSI MasterFormat||Project Accounting|
|Division||Cost Code Level 1||Division||Project|
|Cost Code||Cost Code Level 2||Subdivision||Subsidiary|
|Unused||Cost Code Level 3||Section||Work Breakdown Structure (WBS)|
|Unused||Cost Code Level 4||Subsection||Actual Work Activities|
|Unused||Cost Code Level 5||Subsection||Labour, Equipment, Material (LEM)|
Things to Consider
- Required User Permissions:
- 'Admin' level permission on the Company level Admin tool.
- Cost Code Structure:
- Procore supports up to five (5) cost code levels.
Important! In order to support a cost cost structure three (3) or more levels, the Project level Budget tool must also be configured to use the (Multi-Level) Procore Standard Budget view, instead of the Procore Standard Budget View. See Steps below.
- Procore supports up to five (5) cost code levels.
- CSI Master Format:
- Procore's default standard cost code list consists of 17-divisions. See What are Procore's default cost codes?
- CSV File Requirements:
- For general formatting considerations, see How do I prepare my data for import into Procore?
- The XLSX file must be formatted as a table.
- The first line of the table must include the header, which defines the fields in the table.
- The table in cost code import template must contain the following header row:
- Three (3) Level: Cost Code Level 1, Cost Code Level 2, Cost Code Level 3, and Description.
- Four (4) Level: Cost Code Level 1, Cost Code Level 2, Cost Code Level 3, Cost Code Level 4, and Description.
- Five (5) Level: Cost Code Level 1, Cost Code Level 2, Cost Code Level 3, Cost Code Level 4, Cost Code Level 5, and Description.
- Additional Information:
- Typically, most companies use a two (2) level structure. To learn more and to download a template, see Import Two-Level Cost Codes to the Company Admin Tool and Import Two-Level Cost Codes to the Project Admin Tool.
- Many companies also choose to work with a three (3) level structure. Less commonly, Procore customers do choose to use more complex four (4), or five (5) level structures. Typically, these are only when there are specific company or project reporting requirements.
- If you want to import a multi-level cost code to the Project level Admin tool for use on a single project, see Import Multi-Level Cost Codes to the Project Admin Tool.
Complete the following steps in the order below:
- Set Up a Multi-Level Budget View
- Download a Multi-Level Import Template
- Update the Multi-Level Import Template
- Request a Multi-Level Cost Code Import
- Perform the Multi-Level Cost Code Import
- Validate the Multi-Level Cost Code Import
Set Up a Multi-Level Budget View
If you will be using a cost code structure with three (3) or more cost cod levels on one (1) or more projects in your company's Procore account, you'll need to set up a Budget View for those project(s) at the Company level.
- Navigate to the Company level Admin tool.
- Under 'Tool Settings', click Budget.
- Click Set Up New Budget View.
- Under Standard Views, click (Multi-Level) Procore Standard Budget.
On the right side of the Set Up New Budget View window, note that each Cost Code Level in Procore has a corresponding Column Name.
- Click Create.
This creates the new budget view. You can now name, configure and adjust the columns in your new view as desired.
Important! If your company has enabled the Company level ERP Integrations tool and if you are planning to use the (Multi-Level) Procore Standard Budget view on projects that will be syncing data with a integrated ERP system, you will also need to update the Direct Cost and Job To Date columns. See Add the 'ERP Direct Costs' Column to a Procore Budget View for ERP Integrations.
To learn more detailed information about budget views, see these topics:
Download a Multi-Level Import Template
To create a cost code structure for use with your company account or a Procore project, you must always download and completely fill out the Procore's cost code import template.
Note: Procore's import templates are designed for use with Microsoft Excel. For best results, it is recommended that you only update these templates with Microsoft Excel and avoid using other spreadsheet programs (e.g., Google Sheets, Smartsheets, and so on).
- Download the multi-level import template: import-cost-codes.xlsx
Update the Multi-Level Import Template
To update the multi-level import template, follow the instructions in Prepare Cost Codes for Import to the Procore Imports App.
Request a Multi-Level Cost Code Import
After you update the template, include it in your request. To request a multi-level cost code import for your company's Procore account, you must be your company's Procore Administrator.
- Download the Microsoft Excel template: import-cost-codes.xlsx
- Complete the template by following the instructions in Import Cost Codes to Procore.
Note: Ensure you have defined the number of levels in your company's cost code structure.
- Send an email request to firstname.lastname@example.org.
- In your email's 'Subject' line, include your company's or project's name and ID. See How do I find the project ID?
- Attach the completed cost codes import template to your email message.
- A member of the Procore Import Team will contact you once the import is complete.
- Verify the data imported is correct.
Perform the Multi-Level Cost Code Import
After your request is received, a member of the Procore Imports Team will verify that your completed import template meets the formatting and data requirements. After the import template is accepted for processing, Procore will perform the import for you. This process can take up to 72 hours. You will be notified when the import is complete, so you can validate the imported data. See Validate the Multi-Level Cost Code Import.
Validate the Multi-Level Cost Code Import
- Navigate to the company's or project's Admin tool.
- In the right pane, click the Cost Codes link.
- On the page that appears, validate that the imported cost code structure displays as expected.
As shown in the illustrations below, cost codes imported at the company level appear on the left side of the page in the Admin tool, while cost codes imported at the project level appear on the right side of the page.
Company Level Admin Tool: After a Cost Code Import
Project Level Admin Tool: After a Cost Code Import